02 October 12
CCIE R&S Troubleshooting Lab 1 for GNS3
Posted byINE
Below are the links to the INE CCIE R&S TS Lab 1 GNS3 files. If you are familiar with GNS3 it shouldn't be too hard to get up and working. The IOS image needs to be referenced and the idle PC values set for your machine. I would also highly recommend tuning up any protocol timers to their max values as this eases the load on GNS3 with such a big topology.
Note that in the ticket 4 isn't an issue for the GNS3 topology.
Share this post with your network
