CCIE Security Lab Expande ...
    13 January 09

    CCIE Security Lab Expanded Blueprint 3.X

    Posted byINE

    Bookmark this page and check back often for updates! As you can see it is very much a work in progress, but I will be making updates.

    I. Implement secure networks using Cisco ASA Firewalls

    A. Perform basic firewall Initialization

    1. Restoring the Factory Default Configuration

    a. configure factory-default [ip_address [mask]]

    2. Saving Configuration Changes

    a. write memory all [/noconfirm]

    3. Setting the Login Password

    a. Used for Telnet and SSH connections; default is cisco
    b. {passwd | password} password

    4. Setting the Enable Password

    a. Default is blank
    b. enable password password

    5. Setting the Hostname

    a. hostname name

    6. Setting the Domain Name

    a. Appended to unqualified names
    b. Default is default.domain.invalid
    c. domain-name name

    7. Setting the Date and Time

    a. NTP server will override any manually set time
    b. clock timezone zone [-]hours [minutes]
    c. clock summer-time zone date {day month | month day} year hh:mm {day month | month day} year hh:mm [offset]
    d. clock summer-time zone recurring [week weekday month hh:mm week weekday month hh:mm] [offset]
    e. ntp authenticate
    ntp trusted-key key_id
    ntp authentication-key key_id md5 key
    ntp server ip_address [key key_id] [source interface_name] [pref er]
    f. clock set hh:mm:ss {month day | day month} year

    8. Configuring Ethernet Interfaces

    a. interface physical_interface
    speed {auto | 10 | 100 | 1000 | nonegotiate}
    duplex {auto | full | half}
    no shutdown

    9. Configuring Fiber Interfaces

    a. interface gigabitethernet 1/port
    media-type sfp
    speed nonegotiate
    no shutdown

    10. Configuring a Redundant Interface

    a. interface redundant number
    interface redundant number
    redundant-interface redundantnumber active-member physical_interface

    11. Configuring Interface Parameters

    a. no shutdown
    b. nameif
    c. security-level
    d. management-only
    e. ip address
    f. mac-address

    12. Allowing Communication Between Interfaces of Same Security Level

    a. same-security-traffic permit inter-interface

    B. Configure device management

    1. Local Database

    a. username name {nopassword | password password [mschap]} [privilege

    2. AAA Servers

    a. aaa-server server_group protocol {kerberos | ldap | nt | radius |
    sdi | tacacs+}
    aaa-server server_group (interface_name) host server_ip

    3. Allowing Telnet Access

    a. telnet source_IP_address mask source_interface

    4. Allowing SSH Access

    a. crypto key generate rsa modulus modulus_size
    write mem
    ssh source_IP_address mask source_interface

    5. Allowing HTTPS Access for ASDM

    a. http source_IP_address mask source_interface
    http server enable [port]
    asdm image disk0:/asdmfile

    6. Managing the Security Appliance on a Different Interface from the VPN Tunnel Termination Interface

    a. management access management_interface

    7. LDAP Authentication Support

    C. Configure address translation (nat, global, static)
    D. Configure ACLs
    E. Configure IP routing

    1. Static Routing
    2. Default Routing
    3. OSPF
    4. RIP

    a. Generating a default route

    b. Disabling route summarization

    c. Network filtering

    d. Send and receive versions

    e. RIP Authentication

    5. EIGRP
    6. Route Maps
    7. Multicast Routing

    a. Enabling
    b. IGMP
    c. Stub Multicast Routing
    d. Static Multicast Routes
    e. PIM Features

    F. Configure object groups

    1. Enhanced Service Object Groups

    G. Configure VLANs

    1. VLAN Support for RA VPN

    H. Configure filtering
    I. Configure failover
    J. Configure Layer 2 Transparent Firewall

    1. Transparent Firewall NAT

    K. Configure security contexts (virtual firewall)
    L. Configure Modular Policy Framework
    M. Configure Application-Aware Inspection
    N. Configure high availability solutions
    O. Configure QoS policies
    P. Cisco Secure Desktop
    Q. Other Advanced Features

    1. Local CA
    2. Dynamic Access Policies
    3. Inspection for Web/SSL VPN Traffic
    4. Enahcned ASA protection (Threat Detection)

    II. Implement secure networks using Cisco IOS Firewalls

    A. Configure CBAC

    1. CBAC Enhancements

    B. Configure Zone-Based Firewall
    C. Configure Audit
    D. Configure Auth Proxy
    E. Configure PAM
    F. Configure access control
    G. Configure performance tuning
    H. Configure advanced IOS Firewall features

    1. ACL IP Option Selective Drop
    2. IOS L2 Transparent Firewall
    3. Application Firewall
    4. HTTP Inspection
    5. HTTP Applications
    6. Instant Messaging
    7. Flexible Packet Matching

    III. Implement secure networks using Cisco VPN solutions

    A. Configure IPsec LAN-to-LAN (IOS/ASA)
    B. Configure SSL VPN (IOS/ASA)
    C. Configure Dynamic Multipoint VPN (DMVPN)

    1. Advanced DMVPN
    2. DMVPN Phase 3

    D. Configure Group Encrypted Transport (GET) VPN
    E. Configure Easy VPN (IOS/ASA)

    1. EZVPN Enhancements

    a. Multiple Inside/Outside Interfaces
    b. Proxy DNS
    c. Peer Hostname
    d. VTI Support
    e. DPD Enhancements

    F. Configure CA (PKI)

    1. IOS CA

    a. OCSP
    b. Subordinate/RA Mode IOS Certificate Server (CS) Rollover
    c. Certificate ACLs
    d. Key Rollover for Certificate Renewal

    G. Configure Remote Access VPN
    H. Configure Cisco Unity Client
    I. Configure Clientless WebVPN
    J. Configure AnyConnect VPN
    K. Configure XAuth, Split-Tunnel, RRI, NAT-T
    L. Configure High Availability
    M. Configure QoS for VPN
    N. Configure GRE, mGRE
    O. Configure L2TP
    P. Configure advanced Cisco VPN features

    1. IPsec VPN Enhancements

    a. VTI Support
    b. Encrypted PSK

    IV. Configure Cisco IPS to mitigate network threats

    A. Configure IPS 4200 Series Sensor Appliance
    B. Initialize the Sensor Appliance

    1. Sensor Password Recovery

    C. Configure Sensor Appliance management
    D. Configure virtual Sensors on the Sensor Appliance
    E. Configure security policies
    F. Configure promiscuous and inline monitoring on the Sensor Appliance
    G. Configure and tune signatures on the Sensor Appliance
    H. Configure custom signatures on the Sensor Appliance
    I. Configure blocking on the Sensor Appliance
    J. Configure TCP resets on the Sensor Appliance
    K. Configure rate limiting on the Sensor Appliance
    L. Configure signature engines on the Sensor Appliance
    M. Use IDM to configure the Sensor Appliance
    N. Configure event action on the Sensor Appliance
    O. Configure event monitoring on the Sensor Appliance
    P. Configure advanced features on the Sensor Appliance

    1. Threat Rating
    2. Anomaly Detection
    3. TCP Session Tracking Modes
    4. Configuration via the IME

    Q. Configure and tune Cisco IOS IPS
    R. Configure SPAN & RSPAN on Cisco switches

    V. Implement Identity Management

    A. Configure RADIUS and TACACS+ security protocols
    B. Configure LDAP
    C. Configure Cisco Secure ACS
    D. Configure certificate-based authentication
    E. Configure proxy authentication
    F. Configure 802.1x
    G. Configure advanced identity management features
    H. Configure Cisco NAC Framework
    I. Per VRF AAA
    J. PKI AAA Authorization

    VI. Implement Control Plane and Management Plane Security

    A. Implement routing plane security features (protocol authentication, route filtering)
    B. Configure Control Plane Policing
    C. Configure CP protection and management protection
    D. Configure broadcast control and switchport security
    E. Configure additional CPU protection mechanisms (options drop, logging interval)
    F. Disable unnecessary services
    G. Control device access (Telnet, HTTP, SSH, Privilege levels)
    H. Configure SNMP, Syslog, AAA, NTP
    I. Configure service authentication (FTP, Telnet, HTTP, other)
    J. Configure RADIUS and TACACS+ security protocols
    K. Configure device management and security

    1. IOS Login Enhancements
    2. IP Source Tracker
    3. Role Based CLI
    4. IOS Resilient Configuration
    5. Buffer Overflow Detection and correction
    6. Additional CPU protection mechanisms (options drop, logging interval)

    VII. Configure Advanced Security

    A. Configure mitigation techniques to respond to network attacks
    B. Configure packet marking techniques
    C. Implement security RFCs (RFC1918/3330, RFC2827/3704)
    D. Configure Black Hole and Sink Hole solutions
    E. Configure RTBH filtering (Remote Triggered Black Hole)
    F. Configure Traffic Filtering using Access-Lists
    G. Configure IOS NAT
    H. Configure TCP Intercept
    I. Configure uRPF
    J. Configure CAR
    K. Configure NBAR
    L. Configure NetFlow
    M. Configure Anti-Spoofing solutions
    N. Configure Policing
    O. Capture and utilize packet captures
    P. Configure Transit Traffic Control and Congestion Management
    Q. Configure Cisco Catalyst advanced security features
    R. IOS Security Features

    1. DHCP Secured/Authorized ARP
    2. Router IP Traffic Export
    3. Virtual Fragmentation and Reassembly

    VIII. Identify and Mitigate Network Attacks

    A. Identify and protect against fragmentation attacks
    B. Identify and protect against malicious IP option usage
    C. Identify and protect against network reconnaissance attacks
    D. Identify and protect against IP spoofing attacks
    E. Identify and protect against MAC spoofing attacks
    F. Identify and protect against ARP spoofing attacks
    G. Identify and protect against Denial of Service (DoS) attacks
    H. Identify and protect against Distributed Denial of Service (DDoS) attacks
    I. Identify and protect against Man-in-the-Middle (MiM) attacks
    J. Identify and protect against port redirection attacks
    K. Identify and protect against DHCP attacks
    L. Identify and protect against DNS attacks
    M. Identify and protect against Smurf attacks
    N. Identify and protect against SYN attacks
    O. Identify and protect against MAC Flooding attacks
    P. Identify and protect against VLAN hopping attacks
    Q. Identify and protect against various Layer2 and Layer3 attacks

    Hey! Don’t miss anything - subscribe to our newsletter!

    © 2022 INE. All Rights Reserved. All logos, trademarks and registered trademarks are the property of their respective owners.
    instagram Logofacebook Logotwitter Logolinkedin Logoyoutube Logo